Our Equipments
Technical Specifications
Auto Dip-Spin Coating Machine DSTM-600
- Average Single Coat output/ Hr/Machine: 900 Kg/hr
- Average batch capacity: 60 Kg/ load
- Max. Spin RPM: 450 RPM
- Tilting angle: 45-60 degree in one direction
- Basket diameter : 600 mm
- Loading and unloading : By auto- loader and unloading conveyor
Technical Specifications
Auto Dip-Spin Coating Machine DSTM-450
- Average Single Coat output/ Hr/Machine: 500-550 Kg/hr
- Average batch capacity: 35-40 Kg/ load
- Max. Spin RPM: 450 RPM
- Tilting angle: 45-60 degree in one direction
- Basket diameter : 450 mm
- Loading and unloading : By auto- loader and unloading conveyor
Technical Specifications
Manual Dip-Spin Coating Machine DSTM-450
- Average Single Coat output/ Hr/Machine: 400-450 Kg/hr
- Average batch capacity: 35-40 Kg/ load
- Max. Spin RPM: 450 RPM
- Tilting angle: 45 degree
- Basket diameter : 450 mm
- Loading : Manual
- Unloading: By Dumper
Technical Specifications
Manual Dip-Spin Coating Machine DSTM-300
- Average Single Coat output/ Hr/Machine: 150-200 Kg/hr
- Average batch capacity: 12-15 Kg/ load
- Max. Spin RPM: 450 RPM
- Tilting angle: 45 degree
- Basket : 50 mm x 300 mm height
- Loading/Unloading : Manual
- Motor rating : 3 hp (Crompton or equivalent)
- PLC : Delta
- Internal fabrication : Ss 304 (dip tank and spin tank )
- VFD : delta
Technical Specifications
Semi Auto Dip-Spin Coating Machine DSTM-300
- Average Single Coat output/ Hr/Machine: 120-150 Kg/hr
- Average batch capacity: 12-15 Kg/ load
- Max. Spin RPM: 450 RPM
- Basket Diameter : 300 mm
- Loading/ Unloading : Manual
Technical Specifications
Semi Auto Dip-Spin Coating Machine DSTM-450
- Average Single Coat output/ Hr/Machine: 400-450 Kg/hr
- Average batch capacity: 35-40 Kg/ load
- Tilting angle : 45 degree
- Max. Spin RPM: 450 RPM
- Basket Diameter : 450 mm
- Loading: Manual
- Unloading : By dumper (Pneumatic/Air)
Technical Specifications
Water Curtain Spray Booth
- Structure : Water curtain and water tank made by MS SHEET
Outside fabrication 1.6 mm hr sheet. - Blower motor : 2 hp 1440 rpm 1 nos HAVELLS/CROMPTON
- Water circulation motor : 1 hp motor
- Water pipeline : Flow control valve 4 nos , pipeline
- Size : 1500 W x 1600 H x 1500 D mm.
- Hvlp gun set : Spray gun set (imported iwata make with pressure feed pot container with accessories)
Technical Specifications
Belt Conveyor Oven and Furnace
- Design Conveyor Oven
- Construction Inside S.S 304 & Outside MS
- Belt Width 1200 MM
- Overall Length 10000 MM
- Working Height 900 MM
- Insulation 150 MM
- Temperature Control By PID With SSR
- Design Temperature 400ºC
- Working Temperature 250ºC To 320ºC (Maximum)
- Heating Media LPG Fired – Direct
- Position of Heat Exchanger Top of the Oven
- Air Circulation By Blower
- Number of Air Circulation 05 NOS – 10 HP
- Blower Capacity 15000 CFM Each
- Static Pressure 110-120 MM/WG
- Position of Blower Back Side of the Heat Exchanger
- Duct For Air Bottom Side Chain
- Burner Ecoflame:- 2 NOS
- Time 30-35 Min
Technical Specifications
Gas Fired Box Oven
- Burner : 60000 kg cal
- Burner type : LPG gas burner Eco star
- Internal working size : 1 m x 1m x 1 meter
- Insulation thickness : 150 to 200 mm side wall
- Density : Suitable rock wool density 96 kg/m³
- Blower motor : 1 hp foot mounting (1440 rpm)
- LPG line : Seamless pipeline
- Material handling trolly Three : (3) number with 18 trays (MS)
- El. Control panel : L & T make power Contactor & Over Load Relay, MCB, Push button, Indicators, and Digital temp. controller with timer Setting Holding Timing) 0 To 99 min. With 1″ Big Display After Auto buzzer.
- LPG GAS Manifold : LPG as 4 Way Manifold with Nan Return Valves, Gas Adaptor, Flexible Cylinder Pipe, High Pressure Regulators, Pressure Gauge
Tumblast Type Shot Blasting Machine
Pneumatic Stirrer
Take Your Coating Projects to the Next Level.